Recruiter Assisted Job Search

Description

• 1–3+ years of field service experience in electrical testing or commissioning
• Solid understanding of circuit breakers, relays, transformers, and control systems
• Familiarity with SEL, GE Multilin, ABB, Schweitzer, and Basler protective relay systems
• Ability to read and interpret one-line diagrams, schematics, and relay logic
• Hands-on experience with test equipment such as Doble, OMICRON, Megger, and RTS/AVTS software
• Strong communication, documentation, and customer service skills
• Valid driver’s license and clean driving record
• Excellent knowledge of NFPA 70E arc flash practices and jobsite safety protocols

• Prior U.S. Navy EM or ET, or U.S. Army Prime Power Specialist
• NETA Level II certification or NICET Level III/IV
• Associate or Bachelor’s degree in Electrical Engineering Technology or related field
• OSHA 10/30, First Aid/CPR, or similar safety certifications

• Perform acceptance, maintenance, and commissioning tests on electrical power systems ranging from 480V to 345kV
• Conduct protective relay testing (electromechanical, solid-state, and microprocessor-based)
• Troubleshoot control circuits, switchgear, transformers, breakers, switches, and MCCs
• Interpret electrical drawings and relay logic for troubleshooting and diagnostics
• Interface directly with customers, providing professional service and technical insight
• Generate accurate and detailed test reports in compliance with NETA, IEEE, and NFPA 70E standards
• Maintain strong safety practices and adhere to all jobsite protocols
• Travel regionally and nationally to customer sites as required

Description

Description

We are looking for individuals to commission mission critical center equipment systems, such as power generation and distribution systems, uninterruptible power supplies, static transfer switches, PDU's, BAS & BMS systems and HVAC equipment. The candidate must have a working knowledge of electrical/electronic and mechanical systems or equivalent industry experience with proven customer service skills. Experience associated with industrial level generators, Uninterruptable Power Supplies, HVAC and Power conditioning equipment is a benefit. The candidate should be technically competent on test equipment such as: AC/DC amp probe, digital voltmeter, phase rotation meters, battery conductance tester, battery load tester and micro-ohm meter. This position will require a minimum of 75% travel. The position will require national and/or international travel.

Position is performed remotely; however, may require travel/driving to client locations for training, meetings and other in-person events.

RESPONSIBILITIES

• Perform design reviews of systems.
• Develop, oversee and write startup and commissioning policies and procedures.
• QA/QC of the equipment installation.
• Perform construction observations and develop functional test plans.
• Execute tests for a wide variety of electrical and mechanical systems and to ensure testing is performed in conformance with standards and procedures.
• Assist in training of plant operations and maintenance personnel.
• Act as liaison with vendors and subcontractors regarding problem resolution and perform testing as required.
• Review and analyze data and prepare technical reports.
• Maintain effective communication with clients, contractors and other project team members.
• Work with others to manage small to mid-size projects to meet client expectations for technical excellence, budget and schedule.
• *Other duties as assigned.

REQUIRED EDUCATION, KNOWLEDGE and ABILITIES

• 7 years of industry experience in either electrical power distribution or mechanical systems or both. AA degree, military training or equivalent work experience.
• Experience in diagnosing and solving construction and operational problems.
• Be organized; possess excellent written and oral communication skills.
• Experience with MS word and excel is a must.
• Must have the ability to work in a high stress environment, ability to multi-task and meet deadlines.
• Good interpersonal skills and ability to work with and guide others.
• Knowledge of building codes and construction industry standards.
• Working knowledge of AutoCAD.
• Must have or be able to obtain a passport
• Must have demonstrated proficiency for all the responsibilities of a Commissioning Engineer.
• Five (5) years of experience in the commissioning field including performance contracting requirements.
• Must be proficient in BCA, PECI and/or ASHRAE commissioning procedures.
• Hospital, biotech, data center, and energy analysis experience is preferred.
• Ability and willingness to travel, 75% of the time.
• Provide personal transportation for meetings and job visits away from the office; reimbursed.
  

A candidate's salary offer is determined by various factors including, but not limited to, relevant work experience, knowledge, skills, abilities, education, certifications, licenses, and location.

Company offers comprehensive benefits package including medical, dental, vision, prescription coverage, health savings account, flexible spending account (both healthcare and dependent), 401(k) with a Company match, Paid Time Off, paid company holidays, short term and long-term disability, life insurance, employee assistance program, tuition reimbursement, paid parental leave, gym membership discount and team member referral bonus.

Our dedication to the principle of pay equity is steadfast. We believe in equal pay for work of equal value.

Description

We are looking for individuals to commission mission critical center equipment systems, such as power generation and distribution systems, uninterruptible power supplies, static transfer switches, PDU's, BAS & BMS systems and HVAC equipment. The candidate must have a working knowledge of electrical/electronic and mechanical systems or equivalent industry experience with proven customer service skills. Experience associated with industrial level generators, Uninterruptable Power Supplies, HVAC and Power conditioning equipment is a benefit. The candidate should be technically competent on test equipment such as: AC/DC amp probe, digital voltmeter, phase rotation meters, battery conductance tester, battery load tester and micro-ohm meter. This position will require a minimum of 75% travel. The position will require national and/or international travel.

Position is performed remotely; however, may require travel/driving to client locations for training, meetings and other in-person events.

RESPONSIBILITIES

• Perform design reviews of systems.
• Develop, oversee and write startup and commissioning policies and procedures.
• QA/QC of the equipment installation.
• Perform construction observations and develop functional test plans.
• Execute tests for a wide variety of electrical and mechanical systems and to ensure testing is performed in conformance with standards and procedures.
• Assist in training of plant operations and maintenance personnel.
• Act as liaison with vendors and subcontractors regarding problem resolution and perform testing as required.
• Review and analyze data and prepare technical reports.
• Maintain effective communication with clients, contractors and other project team members.
• Work with others to manage small to mid-size projects to meet client expectations for technical excellence, budget and schedule.
• *Other duties as assigned.

REQUIRED EDUCATION, KNOWLEDGE and ABILITIES

• 7 years of industry experience in either electrical power distribution or mechanical systems or both. AA degree, military training or equivalent work experience.
• Experience in diagnosing and solving construction and operational problems.
• Be organized; possess excellent written and oral communication skills.
• Experience with MS word and excel is a must.
• Must have the ability to work in a high stress environment, ability to multi-task and meet deadlines.
• Good interpersonal skills and ability to work with and guide others.
• Knowledge of building codes and construction industry standards.
• Working knowledge of AutoCAD.
• Must have or be able to obtain a passport
• Must have demonstrated proficiency for all the responsibilities of a Commissioning Engineer.
• Five (5) years of experience in the commissioning field including performance contracting requirements.
• Must be proficient in BCA, PECI and/or ASHRAE commissioning procedures.
• Hospital, biotech, data center, and energy analysis experience is preferred.
• Ability and willingness to travel, 75% of the time.
• Provide personal transportation for meetings and job visits away from the office; reimbursed.
  

A candidate's salary offer is determined by various factors including, but not limited to, relevant work experience, knowledge, skills, abilities, education, certifications, licenses, and location.

Company offers comprehensive benefits package including medical, dental, vision, prescription coverage, health savings account, flexible spending account (both healthcare and dependent), 401(k) with a Company match, Paid Time Off, paid company holidays, short term and long-term disability, life insurance, employee assistance program, tuition reimbursement, paid parental leave, gym membership discount and team member referral bonus.

Our dedication to the principle of pay equity is steadfast. We believe in equal pay for work of equal value.

Description

We are looking for individuals to commission mission critical center equipment systems, such as power generation and distribution systems, uninterruptible power supplies, static transfer switches, PDU's, BAS & BMS systems and HVAC equipment. The candidate must have a working knowledge of electrical/electronic and mechanical systems or equivalent industry experience with proven customer service skills. Experience associated with industrial level generators, Uninterruptable Power Supplies, HVAC and Power conditioning equipment is a benefit. The candidate should be technically competent on test equipment such as: AC/DC amp probe, digital voltmeter, phase rotation meters, battery conductance tester, battery load tester and micro-ohm meter. This position will require a minimum of 75% travel. The position will require national and/or international travel.

Position is performed remotely; however, may require travel/driving to client locations for training, meetings and other in-person events.

RESPONSIBILITIES

• Perform design reviews of systems.
• Develop, oversee and write startup and commissioning policies and procedures.
• QA/QC of the equipment installation.
• Perform construction observations and develop functional test plans.
• Execute tests for a wide variety of electrical and mechanical systems and to ensure testing is performed in conformance with standards and procedures.
• Assist in training of plant operations and maintenance personnel.
• Act as liaison with vendors and subcontractors regarding problem resolution and perform testing as required.
• Review and analyze data and prepare technical reports.
• Maintain effective communication with clients, contractors and other project team members.
• Work with others to manage small to mid-size projects to meet client expectations for technical excellence, budget and schedule.
• *Other duties as assigned.

REQUIRED EDUCATION, KNOWLEDGE and ABILITIES

• 7 years of industry experience in either electrical power distribution or mechanical systems or both. AA degree, military training or equivalent work experience.
• Experience in diagnosing and solving construction and operational problems.
• Be organized; possess excellent written and oral communication skills.
• Experience with MS word and excel is a must.
• Must have the ability to work in a high stress environment, ability to multi-task and meet deadlines.
• Good interpersonal skills and ability to work with and guide others.
• Knowledge of building codes and construction industry standards.
• Working knowledge of AutoCAD.
• Must have or be able to obtain a passport
• Must have demonstrated proficiency for all the responsibilities of a Commissioning Engineer.
• Five (5) years of experience in the commissioning field including performance contracting requirements.
• Must be proficient in BCA, PECI and/or ASHRAE commissioning procedures.
• Hospital, biotech, data center, and energy analysis experience is preferred.
• Ability and willingness to travel, 75% of the time.
• Provide personal transportation for meetings and job visits away from the office; reimbursed.
  

A candidate's salary offer is determined by various factors including, but not limited to, relevant work experience, knowledge, skills, abilities, education, certifications, licenses, and location.

Company offers comprehensive benefits package including medical, dental, vision, prescription coverage, health savings account, flexible spending account (both healthcare and dependent), 401(k) with a Company match, Paid Time Off, paid company holidays, short term and long-term disability, life insurance, employee assistance program, tuition reimbursement, paid parental leave, gym membership discount and team member referral bonus.

Our dedication to the principle of pay equity is steadfast. We believe in equal pay for work of equal value.

Description

We are looking for individuals to commission mission critical center equipment systems, such as power generation and distribution systems, uninterruptible power supplies, static transfer switches, PDU's, BAS & BMS systems and HVAC equipment. The candidate must have a working knowledge of electrical/electronic and mechanical systems or equivalent industry experience with proven customer service skills. Experience associated with industrial level generators, Uninterruptable Power Supplies, HVAC and Power conditioning equipment is a benefit. The candidate should be technically competent on test equipment such as: AC/DC amp probe, digital voltmeter, phase rotation meters, battery conductance tester, battery load tester and micro-ohm meter. This position will require a minimum of 75% travel. The position will require national and/or international travel.

Position is performed remotely; however, may require travel/driving to client locations for training, meetings and other in-person events.

RESPONSIBILITIES

• Perform design reviews of systems.
• Develop, oversee and write startup and commissioning policies and procedures.
• QA/QC of the equipment installation.
• Perform construction observations and develop functional test plans.
• Execute tests for a wide variety of electrical and mechanical systems and to ensure testing is performed in conformance with standards and procedures.
• Assist in training of plant operations and maintenance personnel.
• Act as liaison with vendors and subcontractors regarding problem resolution and perform testing as required.
• Review and analyze data and prepare technical reports.
• Maintain effective communication with clients, contractors and other project team members.
• Work with others to manage small to mid-size projects to meet client expectations for technical excellence, budget and schedule.
• *Other duties as assigned.

REQUIRED EDUCATION, KNOWLEDGE and ABILITIES

• 7 years of industry experience in either electrical power distribution or mechanical systems or both. AA degree, military training or equivalent work experience.
• Experience in diagnosing and solving construction and operational problems.
• Be organized; possess excellent written and oral communication skills.
• Experience with MS word and excel is a must.
• Must have the ability to work in a high stress environment, ability to multi-task and meet deadlines.
• Good interpersonal skills and ability to work with and guide others.
• Knowledge of building codes and construction industry standards.
• Working knowledge of AutoCAD.
• Must have or be able to obtain a passport
• Must have demonstrated proficiency for all the responsibilities of a Commissioning Engineer.
• Five (5) years of experience in the commissioning field including performance contracting requirements.
• Must be proficient in BCA, PECI and/or ASHRAE commissioning procedures.
• Hospital, biotech, data center, and energy analysis experience is preferred.
• Ability and willingness to travel, 75% of the time.
• Provide personal transportation for meetings and job visits away from the office; reimbursed.
  

A candidate's salary offer is determined by various factors including, but not limited to, relevant work experience, knowledge, skills, abilities, education, certifications, licenses, and location.

Company offers comprehensive benefits package including medical, dental, vision, prescription coverage, health savings account, flexible spending account (both healthcare and dependent), 401(k) with a Company match, Paid Time Off, paid company holidays, short term and long-term disability, life insurance, employee assistance program, tuition reimbursement, paid parental leave, gym membership discount and team member referral bonus.

Our dedication to the principle of pay equity is steadfast. We believe in equal pay for work of equal value.

Description

Responsibilities

• Understand all aspects of diving underwater construction such as structural repairs, diving equipment operation, general construction techniques, and safety
• Determine and define a project’s scope and objectives
• Communicate with clients, management, and team members on the status of tasks & schedules
• The ability to estimate projects and identify exceptions or clarifications
• Work with vendors and subcontractors to coordinate deliverables
• Develop and manage a detailed project schedule and work plan
• Monitor workflow requirements to meet timelines and quality expectations
• Create comprehensive project briefs
• Prepare a budget based on scope of work and availability of resources
• Establish and maintaining timelines and milestones
• Conduct video calls and meetings
• Monitor and redefine project objectives when required
• Oversee the performance of subcontractors to ensure that all work is completed on schedule and to specification
• Oversee and manage change order process of project
• Work with maintenance shop personnel to troubleshoot equipment problems
• Identify safety hazards and production impediments

• Commercial diving experience (or military equivalent)
•  3 +years of underwater operations experience (commercial or military)
• Ability to read/understand project plans, specifications and contract requirements
• Planning and forecasting
• Effective communication, both written and verbal
• Scheduling and time management
• Negotiation
• Leadership and problem-solving
• Excellent analytical skills
• Ability to complete projects according to outlined scope, budget and timeline
• Proficiency with Microsoft Office products to include Project

Description

• Benefits: Robust benefit package that start day one that include Med/Den/Vis, 401K, 23 vacation days, 12 holidays, ISP, TA and more! Company vehicle, phone, and printer provided. All expenses covered. Relocation assistance provided!
• Travel: Required – occasional overnights, depending on territory

Position Description:

• Train for 12-14 weeks for the American Society of Mechanical Engineers (ASME)/National Board training/certification commissions.
• 120 hours of on-the-job training with another Inspector to complete training process.
• Perform new construction, repair, alteration and jurisdiction inspections of boilers and pressure vessels as required by the American Society of Mechanical Engineering Boiler and Pressure Vessel Code (ASME Code) Sections III, and National Board Code including referenced construction codes and standards of our clients.

Requirements:

• High school diploma and equivalent (Military) work experience, or a Bachelor's Degree in Mechanical or Electrical Engineering
• 3-5 years of boiler and/or high-pressure steam & water system maintenance/operation experience
• 4+ years of mechanical experience with Boilers and Pressure Vessels in a power plant-Nuke or conventional MM/BT, or an SRO and/or a Steam PPWO/EOOW 3+ years
• Navy Nuke EM or ET with a minimum of 3yrs qualified SRO experience
• Quality Assurance inspections of mechanical equipment, water, and steam systems
• Boiler and/or steam system maintenance and operation
• Inspections on mechanical, electrical, refrigeration, and air conditioning systems
• NBIC Boiler Inspector Qualification a plus
• Insurance inspection service experience involving risk-based inspections and analysis
• Computer skills: Microsoft Office and web-based applications, Lotus Notes
• Clean driving record and must be able to pass a background check.

Description

• Benefits: Robust benefit package that start day one that include Med/Den/Vis, 401K, 23 vacation days, 12 holidays, ISP, TA and more! Company vehicle, phone, and printer provided. All expenses covered. Relocation assistance provided!
• Travel: Required – occasional overnights, depending on territory

Position Description:

• Train for 12-14 weeks for the American Society of Mechanical Engineers (ASME)/National Board training/certification commissions.
• 120 hours of on-the-job training with another Inspector to complete training process.
• Perform new construction, repair, alteration and jurisdiction inspections of boilers and pressure vessels as required by the American Society of Mechanical Engineering Boiler and Pressure Vessel Code (ASME Code) Sections III, and National Board Code including referenced construction codes and standards of our clients.

Requirements:

• High school diploma and equivalent (Military) work experience, or a Bachelor's Degree in Mechanical or Electrical Engineering
• 3-5 years of boiler and/or high-pressure steam & water system maintenance/operation experience
• 4+ years of mechanical experience with Boilers and Pressure Vessels in a power plant-Nuke or conventional MM/BT, or an SRO and/or a Steam PPWO/EOOW 3+ years
• Navy Nuke EM or ET with a minimum of 3yrs qualified SRO experience
• Quality Assurance inspections of mechanical equipment, water, and steam systems
• Boiler and/or steam system maintenance and operation
• Inspections on mechanical, electrical, refrigeration, and air conditioning systems
• NBIC Boiler Inspector Qualification a plus
• Insurance inspection service experience involving risk-based inspections and analysis
• Computer skills: Microsoft Office and web-based applications, Lotus Notes
• Clean driving record and must be able to pass a background check.

Company Description:

Why HSB GEIS?

Description

• Benefits: Robust benefit package
  that start day one that include Med/Den/Vis, 401K, 23 vacation days, 12
  holidays, ISP, TA and more! Company vehicle, phone, and printer provided.
  All expenses covered. Relocation assistance provided!
• Travel: Required – occasional
  overnights, depending on territory

• Train for 12-14 weeks for the
  American Society of Mechanical Engineers (ASME)/National Board
  training/certification commissions.
• 120 hours of on-the-job training
  with another Inspector to complete training process.
• Perform new construction, repair,
  alteration and jurisdiction inspections of boilers and pressure vessels as
  required by the American Society of Mechanical Engineering Boiler and
  Pressure Vessel Code (ASME Code) Sections III, and National Board Code
  including referenced construction codes and standards of our clients.

• High school diploma and
  equivalent (Military) work experience, or a Bachelor's Degree in
  Mechanical or Electrical Engineering
• 3-5 years of boiler and/or
  high-pressure steam & water system maintenance/operation experience
• 4+ years of mechanical experience
  with Boilers and Pressure Vessels in a power plant-Nuke or conventional
  MM/BT, or an SRO and/or a Steam PPWO/EOOW 3+ years
• Navy Nuke EM or ET with a minimum
  of 3yrs qualified SRO experience
• Quality Assurance inspections of
  mechanical equipment, water, and steam systems
• Boiler and/or steam system
  maintenance and operation
• Inspections on mechanical,
  electrical, refrigeration, and air conditioning systems
• NBIC Boiler
  Inspector Qualification a plus
• Insurance inspection service
  experience involving risk-based inspections and analysis
• Computer skills: Microsoft Office
  and web-based applications, Lotus Notes
• Clean driving record and must be
  able to pass a background check.

Description

• The Senior Field Software Engineer provides advanced software solutions and on-site support for injection molding machines, specializing in rubber and silicone systems. This role integrates complex automation, optimizes production processes, and ensures smooth machine operation using programming expertise and field service skills.

Key Responsibilities

Qualifications

Description

• Compensation: $32/HR to $36/hr plus OT and per diem
• Benefits: Generous benefits package that includes med/den/vis, 401K and more!
• Travel: 100% travel – Monday through Friday (home on Friday)

• Travel to install, services, troubleshoot and repair the fabricating machine tools at customer sitesthroughout the United States, Canada and Mexico.
• Provide high-quality technical service to customers to ensure optimal sheet metal machine performance.
• Document customer machine information and technical conditions and make improvement suggestions.
• Train customers to operate and/or service machines to ensure maximum productivity.
• Act as a Service ambassador and work directly with customers during installations and repairs to enable their business success.

• Must be a flexible professional, curious, and bold, focused on customer service and quality.
• A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics.
• Technologically savvy and experienced in software and file management.

Description

• Compensation: $32/HR to $36/hr plus OT and per diem
• Benefits: Generous benefits package that includes med/den/vis, 401K and more!
• Travel: 100% travel – Monday through Friday (home on Friday)

• Travel to install, services, troubleshoot and repair the fabricating machine tools at customer sitesthroughout the United States, Canada and Mexico.
• Provide high-quality technical service to customers to ensure optimal sheet metal machine performance.
• Document customer machine information and technical conditions and make improvement suggestions.
• Train customers to operate and/or service machines to ensure maximum productivity.
• Act as a Service ambassador and work directly with customers during installations and repairs to enable their business success.

• Must be a flexible professional, curious, and bold, focused on customer service and quality.
• A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics.
• Technologically savvy and experienced in software and file management.

Description

• Compensation: $32/HR to $36/hr plus OT and per diem
• Benefits: Generous benefits package that includes med/den/vis, 401K and more!
• Travel: 100% travel – Monday through Friday (home on Friday)

• Travel to install, services, troubleshoot and repair the fabricating machine tools at customer sitesthroughout the United States, Canada and Mexico.
• Provide high-quality technical service to customers to ensure optimal sheet metal machine performance.
• Document customer machine information and technical conditions and make improvement suggestions.
• Train customers to operate and/or service machines to ensure maximum productivity.
• Act as a Service ambassador and work directly with customers during installations and repairs to enable their business success.

• Must be a flexible professional, curious, and bold, focused on customer service and quality.
• A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics.
• Technologically savvy and experienced in software and file management.

Description

The Material Flow & Inventory Control Principal will work with a team of specialists to optimize inventory storage, availability, material presentation, and delivery to production lines and Kanban locations. This role will oversee receiving, warehousing, and production replenishment.

• Conduct analysis and investigations of considerable complexity pertaining to the development and implementation of efficient material flow, including automated systems, conveyors, RFID of new manufacturing operations, major production activities, and exploration of product and/or process problems.
• Create visual representations of material flow and design optimum PFEP to create optimal flow through the three facilities.
• Design and control work processes used to facilitate the accomplishment of organizational plans as they pertain to inventory control and material flow.
• Analyze current performance metrics and develop effective leading metrics to improve performance using Six Sigma methodology and Lean principles.
• Design and implement a world-class inventory management system that seamlessly integrates with the Lean Manufacturing process/techniques.
• Conduct deep-dive analysis using A3 and Six Sigma methodology to investigate WIP accuracy gaps and develop countermeasures.
• Provide necessary leadership and training to build and maintain a strong inventory management team. Write and maintain departmental work instructions and training documentation.
• Develop a process to ensure material flow to final assembly is aligned with the pacemaker; perform the VSM.
• Interface with other plant departments as required to maintain inventory accuracy and optimize material flow. Work with production planners and material planners with Kanban systems, consignment programs, and cycle counts.
• Remove material flow constraints through long-term sustainable corrective actions and solutions.
• Track inventory trends and report to management on root cause analysis and problem-solving strategies. Ensure effective systems are in place to maximize material flow and minimize expenses.
• Develop effective KPIs to measure and improve team performance.
• Lead Kaizen improvement projects.
• Perform miscellaneous related duties and carry out special projects as assigned.

• Master’s in Supply Chain Management or another business-related field
• 10–15 years of progressive experience in Opex projects, Lean Manufacturing, Material Flow
• Minimum 10 years of experience leading a team
• Industrial Engineer with proven experience

• Strong knowledge of inventory management in a Lean Manufacturing environment
• Experience in different supply logistics environments and solutions
• Demonstrated leadership, communication, and interpersonal skills, along with the ability to coach and maintain effective relationships with staff members
• An investigative nature with advanced math and technical skills
• Six Sigma Black Belt Certification or proven experience
• Kaizen Project Experience or proven experience

Description

The Pre-Construction Coordinator is responsible for facilitating the bid process, coordinating the preparation and submission of bids, and supporting the overall bid management efforts for data center construction projects. This role involves collaboration with various internal and external stakeholders to ensure the accuracy and completeness of bid submissions.

Essential Duties and Responsibilities:

Bid Preparation:

Bid Coordination:

Document Management:

Subcontractor Communication:

Deadline Management:

Quality Assurance:

Description

• Benefits: Generous benefits package that includes med/den/vis, 401K and more!
• Travel: 100% travel – Monday through Friday (home on Friday)

• Travel to install, services, troubleshoot and repair the fabricating machine tools at customer sitesthroughout the United States, Canada and Mexico.
• Provide high-quality technical service to customers to ensure optimal sheet metal machine performance.
• Document customer machine information and technical conditions and make improvement suggestions.
• Train customers to operate and/or service machines to ensure maximum productivity.
• Act as a Service ambassador and work directly with customers during installations and repairs to enable their business success.

• Must be a flexible professional, curious, and bold, focused on customer service and quality.
• A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics.
• Technologically savvy and experienced in software and file management.

Description

• You will be responsible for maintaining electrical systems for all production and facilities equipment in the plant.
• You will work as part of a team to ensure that all preventative and corrective maintenance is performed in a timely manner.
• Schedule, perform, assign, and record maintenance and repair tasks.
• Identify modifications and services to increase crane reliability.
• Support safety initiatives, policies, and procedures.
• Rotating shift work.
• Assist in downturn activities.
• Implement process improvements.
• Participate in electrical upgrade projects.

• Safety - Demonstrate concern for the safety of self and others and is knowledgeable of and consistently follows all accepted safety practices. Has ability to communicate the importance of a safe work environment and the maintenance of plant equipment in relation to safety.
• Communication - Effectively expresses ideas and/or tasks. Clearly express ideas in writing and in good grammatical form. Has ability to convey technical information in a way that can be understood by all team members.
• Teamwork - Communicate and work effectively with others to accomplish tasks and achieve goals of the team. Ability to distinguish and align personal needs with needs of the group. Maintains focus on obtaining goals of the division.
• Judgment/Decision Making - Is able to take action in solving problems while exhibiting good judgment and responsibility with a timely systematic approach to decision making. All actions and decisions are in the best interest of Company
• Initiative - Demonstrated self-starter, always looking for work that needs to be done and ways to improve. Is energetic and motivating to others
• Leadership – Utilizes appropriate interpersonal skills and methods to influence the actions and opinions of others in a desired, positive direction. Exhibits good judgment in leading others to accomplish the team goals and objectives
• Persistence – Must be able to maintain a positive attitude when faced with adversity and to persist in the completion of tasks despite the level of difficulty or frustration involved.
• Innovativeness - Generates new ideas and routinely goes beyond the status quo; recognizes the need for new or modified approaches; brings perspectives and approaches together, combining them in creative ways.

• Excellent Company with great culture of teamwork, non-Union, pay for performance!
• Strong Growth Company
• This is a "top company" for Military Veteran technician hires!
• Excellent Profit Sharing and Stock Purchase Opportunities as part of a very profitable company!!!
  
• Company offers its electricians a very competitive salary with bonuses paid out both weekly (Production Bonus) and monthly (Conversion Bonus). AND a good benefits package including medical and dental and a matching 401K plan.

Description

• Bachelor’s degree in Engineering (Master’s in Electrical Engineering strongly preferred)
• 5+ years of experience in a technical or engineering role
• 5+ years of experience in at least two of the following: PV systems, battery storage systems, plant communications/controllers, medium voltage products, and/or power-to-gas solutions
• Advanced knowledge of engineering and mathematical concepts
• Strong verbal and written communication skills
• Proficiency with Microsoft Office Suite (Word, PowerPoint, Excel)

• Experience in the renewable industry, solar installation, system design, and/or inspection
• Familiarity with SCADA systems, PLCs, and PACs
• Advanced skills with communication protocols (Modbus, DNP, OPC, ICCP, TCP/IP, TCP/UDP)
• Knowledge of power plant measurement devices and techniques
• Advanced knowledge of large-scale product lines
• Fluency in English (German and/or Spanish a plus)
• Ability to work occasional nonstandard business hours

• Provide technical expertise for large-scale products including central inverters, medium voltage equipment, communication and control systems, converters, and rectifiers
• Support technical and engineering teams in troubleshooting complex system failures and provide advanced electrical theory to escalate investigations
• Serve as primary customer interface when required, delivering solutions and technical support
• Collaborate with cross-functional teams to optimize product design, serviceability, and performance
• Conduct root cause analyses and provide recommendations for system improvements
• Develop and maintain technical documentation, databases, and processes for internal teams and customers
• Coach and mentor support teams to elevate their technical capabilities

• Be part of a purpose-driven team advancing renewable energy
• Work remotely with a collaborative, innovation-focused culture
• Competitive compensation and benefits package
• Professional growth and training opportunities
• Direct impact on advancing clean energy solutions

Description

Are you technologically inclined and enjoy troubleshooting, problem-solving, and repairing equipment? This is a great opportunity to apply your technical skills as Measurement Technician I, supporting critical gas measurement systems. In this role, you'll perform maintenance, testing, and calibration on a wide range of measurement equipment to ensure operational safety, accuracy, and compliance.

Key Responsibilities:

• Perform gas flow and meter calculations.
• Test, inspect, maintain, and troubleshoot assigned meters including positive displacement, rotary, Coriolis, turbine, orifice, and ultrasonic meters.
• Test, inspect, maintain, and troubleshoot pressure regulators, control valves, relief valves, and other pressure limiting devices.
• Test, inspect, maintain, and troubleshoot pneumatic control devices, RTUs, EGM systems, and gas analyzers (chromatographs, water vapor, sulfur, hydrogen sulfide, oxygen).
• Perform odorizer maintenance, set injection rates, and monitor/report usage and concentrations.
• Operate and maintain power supply systems.
• Identify pipe, valve, and fitting size and wall thickness using mechanical or electronic devices.
• Ensure electrical installations at company measurement facilities meet codes and standards.
• Install small diameter instrument piping and tubing.
• Complete reports accurately and on time.
• Write about gas handling procedures.
• Consistently work in a safe manner and actively participate in safety programs

Preferred Qualifications:

• Associate degree in a relevant technical field or equivalent experience.
• Desire to learn and grow within the Measurement Technician career path.
• Strong technical and analytical skills.
• Ability to work independently and take initiative.
• Excellent verbal and written communication skills.
• Working knowledge of measurement operations and facility maintenance.
• Proficiency with standard office software.
• Team player who values integrity, honesty, and collaboration.
• Strong focus on safety and innovative problem-solving.

Description

• Perform onsite installation, maintenance, and repair of complex systems and equipment.
• Diagnose technical issues and provide timely solutions to minimize downtime.
• Conduct preventative maintenance and ensure equipment operates according to specifications.
• Document all service activities, including reports, work orders, and customer communications.
• Collaborate with the engineering and support teams to resolve complex technical challenges.
• Follow safety procedures and company policies while on customer sites.

• Associate degree or technical certification in Electronics, Mechanical, or related field, or equivalent experience.
• Experience troubleshooting and repairing mechanical and electrical systems.
• Strong problem-solving skills and ability to work independently.
• Excellent communication and customer service skills.
• Ability to travel regularly to customer locations.
• Valid driver’s license and reliable transportation.

• Competitive hourly pay ($27.41 – $30/hr)
• Paid time off and holidays
• Health, dental, and vision coverage
• 401(k) retirement plan
• Opportunities for career development and training

Description

The Field Service Technician provides on-site calibration, minor repairs, and installation of industrial weighing equipment, control systems, and peripheral devices. This role is critical to ensuring customer equipment operates accurately and reliably, while maintaining high standards of safety and customer service. Technicians may work independently or as part of a regional field service team.

Key Responsibilities:
• Perform on-site calibration, installation, and maintenance of industrial weighing and material handling systems, including heavy-capacity scales
• Troubleshoot and repair mechanical, electronic, and electrical system issues
• Operate company vehicles and equipment safely, including heavy-capacity test units
• Complete calibration test reports, work orders, safety documentation, and daily service logs accurately
• Communicate professionally with customers regarding schedules, service status, and findings
• Assist mentors and participate in rotational after-hours on-call duty as required
• Promote products and services as solutions to customer challenges and collaborate on lead generation and quotes
• Travel to customer sites locally or regionally to provide on-site service and support

Company Description:
A leading provider of weighing and measurement equipment and services, supporting industrial and commercial clients across multiple states. The organization specializes in calibration, preventative maintenance, equipment repair, and scale services for a wide range of industrial measurement solutions.

Description

Position
Description: Building Engineer

• The primary focus of the Building Engineer is to provide
  repair and maintenance services for their assigned location. A 'hands-on'
  'tool-carrying' building engineer with previous verifiable experience to
  perform operational supervision of the chiller, boilers, and all central plant
  machinery as well as maintenance and repairs of electrical, plumbing, HVAC,
  laundry equipment, and kitchen appliances. The successful candidate coordinates
  with outside contractors and works with management to order supplies and tools.
  Professional presence as well as punctuality and reliable attendance are
  essential.

Key
Responsibilities:

• Preventive Maintenance, Corrective Maintenance, and
  Emergency Support maintenance of customer's facilities to include:
• HVAC
• Plumbing
• Motors
• Engines
• Controls
• Electrical
• Publish critical reporting to customers and management
  including Monthly Performance, Results Reports, Correction Action Reports
• Actively interface with customers at all levels
• Ensures customer satisfaction through oral and written
  communication

Requirements:

• Looking for Candidates with a strong technical background
  with experience troubleshooting HVAC equipment, engines, motors, and controls.
  Candidates must be mechanically inclined and have strong
  troubleshooting/problem-solving skills. Candidates should be able to
  communicate clearly both written and verbally and have strong customer service
  skills. Candidates will be self-starters and will be comfortable working by
  themselves and holding themselves accountable. Excellent communication and
  customer service skills are of utmost importance.

Keys to a
Successful Interview:

• Looking for someone not only with technical aptitude but
  also someone who is reliable and fits their culture. Kam (the owner) has built
  this business and is seeking someone who wants to stay in the area and with
  this company for a long time. Most of his employees end up retiring there and
  this is the culture is wanting to continue.
  

Description

The Field Service Technician provides on-site calibration, minor repairs, and installation of industrial weighing equipment, control systems, and peripheral devices. This role is critical to ensuring customer equipment operates accurately and reliably, while maintaining high standards of safety and customer service. Technicians may work independently or as part of a regional field service team.

Description

Join our team and become a part of the leading nationwide provider of commercial food equipment service!

• You will work with customers to electrically/mechanically troubleshoot, diagnose, repair, and maintain a variety of commercial food equipment to include cooking, food preparation, ware washers, weigh wrap, baking and refrigeration.
• You will typically leave from home each morning and work with minimal direct supervision at customer sites.
• You will meet or surpass weekly productivity and customer-oriented goals while maintaining a high level of customer service.
  

Qualifications

What you’ll bring to the table:

• An accredited High School Diploma or GED and 4-6 years of similar electrical/mechanical experience
• You must have a valid Driver’s License and ability to drive multiple hours daily
• You should be able to work Overtime and On-Call as required
• You must be able to attend our industry leading training at our corporate headquarters in Troy, OH

Physical Demands & Work

• The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee may:

• Lift up to 75 lbs with or without assistance
• Climb up to 10 ft with an A-frame ladder
• Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet
• Extensive walking 3-5 miles / day
• Extensive driving 5-6 hours/day
• Kneel, squat, bend, push/pull
• Move in different positions to accomplish tasks in various environments including tight and confined spaces
• Operate motor vehicles or heavy equipment
• Operate machinery and/or power tools
  

Working Conditions

• Office facility and customer facilities (including commercial kitchens of various types of businesses)
• Exposure to noise, heat, cold, slippery, wet dirty conditions may occur
• Travel requirement up to 50% of time
  

Hours of Work

• Normal business hours with occasional/frequent/extended hours as needed
• Flexibility with schedule to meet critical deadlines
• Extended hours may include nights and/or weekends
• Normal scheduled hours cover early mornings, evenings and/or weekends

Why work for us?

• Competitive pay
• Great insurance options with low premiums
• Paid vacation and holidays
• 401K with company match
• Extensive on-the-job, online, and classroom training
• Service vehicle, uniforms, and safety equipment provided
• Safety-conscious work environment

Description

Join our team and become a part of the leading nationwide provider of commercial food equipment service!

• You will work with customers to electrically/mechanically troubleshoot, diagnose, repair, and maintain a variety of commercial food equipment to include cooking, food preparation, ware washers, weigh wrap, baking and refrigeration.
• You will typically leave from home each morning and work with minimal direct supervision at customer sites.
• You will meet or surpass weekly productivity and customer-oriented goals while maintaining a high level of customer service.
  

Qualifications

What you’ll bring to the table:

• An accredited High School Diploma or GED and 4-6 years of similar electrical/mechanical experience
• You must have a valid Driver’s License and ability to drive multiple hours daily
• You should be able to work Overtime and On-Call as required
• You must be able to attend our industry leading training at our corporate headquarters in Troy, OH

Physical Demands & Work

• The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee may:

• Lift up to 75 lbs with or without assistance
• Climb up to 10 ft with an A-frame ladder
• Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet
• Extensive walking 3-5 miles / day
• Extensive driving 5-6 hours/day
• Kneel, squat, bend, push/pull
• Move in different positions to accomplish tasks in various environments including tight and confined spaces
• Operate motor vehicles or heavy equipment
• Operate machinery and/or power tools
  

Working Conditions

• Office facility and customer facilities (including commercial kitchens of various types of businesses)
• Exposure to noise, heat, cold, slippery, wet dirty conditions may occur
• Travel requirement up to 50% of time
  

Hours of Work

• Normal business hours with occasional/frequent/extended hours as needed
• Flexibility with schedule to meet critical deadlines
• Extended hours may include nights and/or weekends
• Normal scheduled hours cover early mornings, evenings and/or weekends

Why work for us?

• Competitive pay
• Great insurance options with low premiums
• Paid vacation and holidays
• 401K with company match
• Extensive on-the-job, online, and classroom training
• Service vehicle, uniforms, and safety equipment provided
• Safety-conscious work environment

Description

• We are seeking a skilled and
  reliable Area Maintenance Technician to join our team, a leading
  manufacturer of dry pet food. The successful candidate will be responsible
  for ensuring the safe and efficient operation of plant equipment and
  systems within the designated area. This role will involve preventive
  maintenance, troubleshooting, repair work, and supporting the production
  and maintenance teams to ensure maximum uptime and productivity.

• Perform routine inspections,
  preventive maintenance, and repairs on production equipment, conveyors,
  mixers, packaging machines, and other mechanical systems within the
  assigned area.

• Diagnose mechanical, electrical,
  hydraulic, and pneumatic issues on equipment and systems. Take immediate
  corrective action to minimize downtime and disruptions in production.

• Assist with the setup and
  calibration of new or repaired equipment. Ensure all equipment is running
  at optimal efficiency.

• Adhere to all company and safety
  regulations. Ensure that all work areas meet health and safety standards.
  Report any unsafe working conditions or equipment malfunctions.

• Maintain accurate maintenance
  logs, work orders, and inventory records. Document maintenance activities,
  repairs, and modifications to equipment.

• Work closely with production and
  quality teams to resolve issues that may affect production efficiency or
  product quality.

• Suggest and assist in the
  implementation of process improvements to enhance equipment reliability,
  reduce downtime, and improve overall plant performance.

• Respond to emergency breakdowns
  and provide support to return the equipment to service as quickly as
  possible.

• Ensure that maintenance supplies
  and spare parts are stocked and stored appropriately for quick access
  during repairs.

• High school diploma or equivalent
  required; technical certification or associate degree in industrial
  maintenance, mechatronics, or a related field preferred.
• Minimum of 3 years of experience
  in industrial or manufacturing maintenance, preferably in a food
  production environment.

• Strong knowledge of mechanical,
  electrical, hydraulic, and pneumatic systems.
• Experience with troubleshooting
  and repairing industrial equipment, such as mixers, conveyors, packaging
  machines, and other production machinery.
• Familiarity with programmable
  logic controllers (PLCs) and industrial automation systems.
• Soft Skills:
• Strong problem-solving and
  critical-thinking skills.
• Ability to work independently as
  well as in a team environment.
• Excellent communication and
  interpersonal skills.
• Strong attention to detail and
  ability to prioritize tasks.

• Ability to lift up to 50 lbs and
  perform physical tasks such as bending, kneeling, and standing for
  extended periods.
• Ability to work in a fast-paced
  environment and handle multiple tasks simultaneously.

• OSHA or equivalent safety
  training certifications.
• Any relevant certifications in
  mechanical, electrical, or industrial systems.

Description

Company Description:
A leading provider of weighing and measurement equipment and services, supporting industrial and commercial clients across multiple states. The organization specializes in calibration, preventative maintenance, equipment repair, and scale services for a wide range of industrial measurement solutions.

Description

We are seeking a highly motivated Field Service Engineer to join our team. This role involves installing, maintaining, and troubleshooting advanced equipment at customer sites to ensure optimal performance and reliability. The ideal candidate is detail-oriented, technically skilled, and able to work independently in the field.

• Perform onsite installation, maintenance, and repair of complex systems and equipment.
• Diagnose technical issues and provide timely solutions to minimize downtime.
• Conduct preventative maintenance and ensure equipment operates according to specifications.
• Document all service activities, including reports, work orders, and customer communications.
• Collaborate with the engineering and support teams to resolve complex technical challenges.
• Follow safety procedures and company policies while on customer sites.

• Associate degree or technical certification in Electronics, Mechanical, or related field, or equivalent experience.
• Experience troubleshooting and repairing mechanical and electrical systems.
• Strong problem-solving skills and ability to work independently.
• Excellent communication and customer service skills.
• Ability to travel regularly to customer locations.
• Valid driver’s license and reliable transportation.

• Competitive hourly pay ($27.41 – $30/hr)
• Paid time off and holidays
• Health, dental, and vision coverage
• 401(k) retirement plan
• Opportunities for career development and training

Description

Join our team and become a part of the leading nationwide provider of commercial food equipment service!

• You will work with customers to electrically/mechanically troubleshoot, diagnose, repair, and maintain a variety of commercial food equipment to include cooking, food preparation, ware washers, weigh wrap, baking and refrigeration.
• You will typically leave from home each morning and work with minimal direct supervision at customer sites.
• You will meet or surpass weekly productivity and customer-oriented goals while maintaining a high level of customer service.
  

Qualifications

What you’ll bring to the table:

• An accredited High School Diploma or GED and 4-6 years of similar electrical/mechanical experience
• You must have a valid Driver’s License and ability to drive multiple hours daily
• You should be able to work Overtime and On-Call as required
• You must be able to attend our industry leading training at our corporate headquarters in Troy, OH

Physical Demands & Work

• The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee may:

• Lift up to 75 lbs with or without assistance
• Climb up to 10 ft with an A-frame ladder
• Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet
• Extensive walking 3-5 miles / day
• Extensive driving 5-6 hours/day
• Kneel, squat, bend, push/pull
• Move in different positions to accomplish tasks in various environments including tight and confined spaces
• Operate motor vehicles or heavy equipment
• Operate machinery and/or power tools
  

Working Conditions

• Office facility and customer facilities (including commercial kitchens of various types of businesses)
• Exposure to noise, heat, cold, slippery, wet dirty conditions may occur
• Travel requirement up to 50% of time
  

Hours of Work

• Normal business hours with occasional/frequent/extended hours as needed
• Flexibility with schedule to meet critical deadlines
• Extended hours may include nights and/or weekends
• Normal scheduled hours cover early mornings, evenings and/or weekends

Why work for us?

• Competitive pay
• Great insurance options with low premiums
• Paid vacation and holidays
• 401K with company match
• Extensive on-the-job, online, and classroom training
• Service vehicle, uniforms, and safety equipment provided
• Safety-conscious work environment

Description

Description

Key Responsibilities:
• Perform on-site calibration, installation, and maintenance of industrial weighing and material handling systems, including heavy-capacity scales
• Troubleshoot and repair mechanical, electronic, and electrical system issues
• Operate company vehicles and equipment safely, including heavy-capacity test units
• Complete calibration test reports, work orders, safety documentation, and daily service logs accurately
• Communicate professionally with customers regarding schedules, service status, and findings
• Assist mentors and participate in rotational after-hours on-call duty as required
• Promote products and services as solutions to customer challenges and collaborate on lead generation and quotes
• Travel to customer sites locally or regionally to provide on-site service and support

Company Description:
A leading provider of weighing and measurement equipment and services, supporting industrial and commercial clients across multiple states. The organization specializes in calibration, preventative maintenance, equipment repair, and scale services for a wide range of industrial measurement solutions.