Description

Description

Position: CNC Lathe Machinist

Job Type: Full-time

Key Responsibilities:

• Perform complete machine setups with minimal supervision
• Install tools and jaws, bore jaws as needed
• Inspect parts using calipers, micrometers, dial indicators, height stands, and other precision instruments
• Monitor and adjust machine offsets to maintain quality
• Maintain a clean and organized work area

• Monday to Friday
• Day shift (8 – 10-hour shifts)
• Additional overtime available

• 401(k) with match
• Health, Dental, and Vision Insurance
• Life Insurance
• Paid Time Off

• High school diploma or equivalent
• Prior experience with Haas lathes is a plus.

Description

Engineers benefit from approximately four months off each year during December, January, June, and July.

• Heavy maintenance experience and strong leadership ability
• Excellent communication skills
• Ability to supervise teams and coordinate work during large equipment maintenance outages
• Ability to travel extensively and work extended hours while deployed
• Military leadership experience highly valued, especially veterans with electrical, mechanical, or electronics maintenance backgrounds

• Complete classroom and lab training in Orlando during the first 12 months combined with field training at multiple customer sites
• Work directly with senior field service engineers to develop skills in equipment operation, maintenance, job site safety, project management, leadership, and business systems
• Supervise technicians and mechanics during turbine generator equipment maintenance outages
• Disassemble, inspect, and reassemble turbines and generators
• Coordinate upgrades of mechanical and electrical systems to improve output and efficiency
• Collaborate with engineering staff on specialized testing
• Serve as the primary customer contact during outages and ensure timely and accurate repairs
• Work extended hours while deployed, typically 12–14 hours per day including weekends and holidays

Nice-to-Have Skills, Experience, and Education

• Bachelor’s degree preferred
• Master’s degree a plus
• Military veterans with backgrounds such as Electrician’s Mate, Machinist’s Mate, or Industrial Electronics Technician (E6 or above)
• Experience working with power generation equipment such as turbines, generators, or large rotating machinery

• Training program begins July 7
• Candidate submissions are due by the end of March
• Interviews will be conducted in Orlando at the end of April with travel expenses covered
• Alternate interview dates may be available if needed
• Candidates who do not relocate to Orlando will receive a housing stipend during classroom phases in Orlando, typically lasting about six weeks
  

Description

SHT Mechanic

About the Organization

IMIA, LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion.

IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in:

• Health
• Dental
• Vision
• Life
• LTD
• Accident
• Critical Illness
• 401k

Employees and their household members are also eligible to participate in the company's Employee Assistance Program.

Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work.

EOE Statement

IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.

Description

JOB TITLE: SHT Mechanic

REPORTS TO: Superintendent

SUMMARY

Removal and installation of hull treatment and non-metallic coatings on United States Navy nuclear-powered submarines. Position requires a willingness to learn, dependability, and the ability to think critically.

ESSENTIAL DUTIES & RESPONSIBILITIES

Ensure work is done safely and meets quality standards.

Ability to perform carpentry-type duties to include use of manual tools, power tools, and building of containments.

Read and interpret documents as necessary, such as operating and maintenance manuals, safety rules and regulations, procedure manuals, etc.

May prepare molds and templates for fabrication of hull treatment.

Maintain a clean work environment where coatings work is being performed.

Demonstrate comprehension of complex shapes and the ability to understand symmetrical gaps both parallel and perpendicular to the ships surface shape.

Mixing of different types of solvent and adhesive materials.

Use of troweling tools and adhesives, and work with equipment specific to hull treatment installations

Understanding fairness and flushness with regards to surface preparation.

Follow all company rules and policies.

Provide a great level of attention to detail and focus on the given task.

May be required to perform additional duties as deemed necessary by the Superintendent.

Must be willing to comply with clean shaven standards needed to wear half/full face respirator.

Must be able to pass a thorough background investigation to obtain access into a shipyard environment.

PREFERRED EXPERIENCE

Commercial Carpentry

Ceramic or Composite Tile Installation

Shipyard, Manufacturing, or Industrial Experience

KNOWLEDGE, SKILLS, AND ABILITIES

Must be able to work cooperatively and productively with other employees and shipyard personnel.

Must be able identify and measure material.

Must be able to calculate basic figures.

Must be able to carry out instructions furnished in oral, written, or diagram form.

Must be able to problem solve, organize, and prioritize work.

Must be able to perform required duties efficiently and independently.

EDUCATION

None

WORKING CONDITIONS

Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, confined spaces, precarious places, proximity to other employees. To avoid injury, safety clothing is required along with safety devices to protect eyes, mouth, or hearing.

Regularly required to walk; frequently required to stand, stoop, kneel, crouch, climb, balance, or crawl, occasionally required to sit, required to reach with hands and arms, use hands to feel, grip, or handle, regularly required to lift and/or move up to 50 pounds, required use of vision to see up close, distance, and peripherally, as well as depth perception and ability to adjust focus.

Shift work is involved most of the time. Travel may be required. Mandatory overtime will be required.

EQUIPMENT USED

Various

SUPERVISORY RESPONSIBILITIES

None

REASONABLE ACCOMMODATIONS

May be made to enable qualified individuals with disabilities to perform essential job functions.

Location Portsmouth, VA

Salary Range Non-Exempt

Description

• Lead QC staff and manage daily inspection activities
• Maintain quality procedures, documentation, and inspection protocols
• Oversee incoming, in-process, and final inspections of machined components
• Ensure compliance with ISO 9001, MIL-I, and SAE standards
• Investigate non-conformances and implement corrective/preventive actions
• Manage calibration schedules and records for all measurement equipment
• Ensure traceability and documentation of calibration activities
• Analyze quality data to identify trends and improvement opportunities
• Collaborate across departments to resolve quality issues

• 3+ years of QC experience in machining or manufacturing
• Strong understanding of machining tolerances, inspection methods, and GD&T (Geometric Dimensioning and Tolerancing) symbols.
• Proficient with measurement tools (Dial calipers, micrometers, profilometers, thread measuring wires, height stands etc.) and calibration practices.
• Experience with the use of Optical Comparators
• Experience with ISO 9001, MIL-I, and SAE standards
• Effective communicator with solid documentation skills
• Able to lead, train, and support a team
• Familiarity with quality software and reporting tools is a plus

• Hourly rate ($24–$32/hour) – Based on Experience
• 401K with match
• Health, dental, and vision insurance
• Paid time off and holidays
• Team-oriented work environment

Description

Inside Sales Representative

Company: BEC Machine Products (Sesco Precision)

Location: Harleysville, PA

Employment Type: Full-Time

Description

Sesco Precision supplies high-quality aerospace fasteners and precision components to OEMs, MROs, and manufacturers in the aerospace and defense industries. The company is known for strong technical knowledge, hands-on customer service, and delivering reliable solutions that meet strict aerospace specifications.

About the Role

The Inside Sales Representative will support aerospace and defense customers by recommending and supplying precision fasteners and components that meet complex technical and quality requirements. This is a hands-on, mechanically focused sales role requiring blueprint interpretation, technical communication, and strong account management skills.

What You'll Do

• Build and maintain strong relationships with aerospace and defense customers
• Identify new business opportunities within assigned accounts and territories
• Recommend fasteners, hardware, and related components based on customer drawings and specifications
• Interpret technical prints and part requirements to ensure product compliance and fit
• Prepare quotes and follow up on open opportunities
• Track customer activity and sales pipeline progress
• Coordinate with inside sales, quality, and warehouse teams to ensure accurate order fulfillment

General Responsibilities:

• Maintain a professional, customer-focused approach at all times
• Manage time and territory effectively
• Communicate clearly with customers, engineers, buyers, and internal teams
• Support business growth through proactive follow-up and relationship development

Must-Have Skills and Experience

• 3+ years of inside sales experience in a manufacturing or industrial environment
• Strong mechanical aptitude with the ability to read and interpret blueprints and technical drawings
• Excellent communication and organizational skills
• Self-motivated with strong follow-up discipline
• Proficiency with Microsoft Office and CRM systems
• Valid driver's license and ability to travel locally and regionally

Nice-to-Have Skills

• Experience working with aerospace material specifications and certifications
• Experience working in an inside sales environment preferably selling fasteners, aerospace hardware, or industrial products
• Familiarity with aerospace quality standards and compliance documentation
• Background supporting OEMs, MROs, or aerospace manufacturing customers
• Experience in technical or engineered product sales environments

Who You Are

• A relationship builder who thrives in customer-facing environments
• Detail-oriented and comfortable working with prints, specifications, and quality requirements
• Organized and disciplined in managing quotes, follow-ups, and customer communication
• Motivated by growth, accountability, and long-term customer partnerships

Benefits

• Pay Range: $60,000 – $70,000
• Health, dental, and vision benefits
• 401(k) retirement plan
• Opportunity to grow within a well-established aerospace-focused organization

Description

• Support the sales team in pre-sales engagements by reviewing customer requirements and recommending solutions.
• Prepare product configurations, technical drawings, and commercial proposals with accuracy and attention to detail.
• Review RFQ packages, including technical specifications, single-line diagrams, and customer submittals.
• Coordinate with engineering, procurement, and operations teams to validate manufacturability and compliance.
• Participate in internal and external meetings to support project handovers and clarify technical details.
• Manage order processing and assist with job file transitions to the projects team.
• Provide post-sales support, including documentation updates and coordination with execution teams.
• Maintain quoting tools, templates, and standard documentation.
• Stay current with industry standards and applicable product codes (e.g., UL891, UL508A, NEC).

• Bachelor’s degree in Electrical Engineering or equivalent technical field (Associates + relevant experience considered).
• 2–4 years of experience in application engineering, electrical design, or technical sales support, ideally within power distribution or related manufacturing industries.
• Extensive knowledge of PDUs, RPPs, UL891 switchboards, low-voltage distribution systems, and prefabricated/skidded LV solutions.
• Familiarity with CRM platforms (Salesforce, HubSpot, or similar) and ERP systems (SAP, Oracle, or NetSuite preferred).
• Understanding of electrical codes and UL standards for low-voltage distribution equipment.
• Proficiency with Microsoft Office Suite (Excel, PowerPoint, Word).
• Strong communication and organizational skills.
• Detail-oriented with the ability to manage multiple tasks and priorities.
• Collaborative, customer-focused mindset with eagerness to learn and grow.
• Professional, adaptable, and proactive in problem-solving.

• Competitive salary and performance-based incentives
• Health, dental, and vision insurance
• 401(k) retirement plan
• Paid time off and holidays
• Professional development and career advancement opportunities
• Dynamic and innovative work environment

Description

• Focus on customer needs and satisfaction by troubleshooting, installation, validation, maintenance and service repair needs on pharmacy automated equipment.
• Perform 2nd Level hardware preventive and corrective maintenance, as well as some software maintenance.
• Schedule 1st Level (3rd party) resources, including preventative maintenance and service calls.
• Monitor and support 1st Level (3rd party) resources to complete emergency break fix service calls.
• Support the facility group with any enhancements or upgrades that may impact the operation of the company's system by providing information and technical knowledge for a successful implementation.
• Work with the facility (customer) to schedule appropriate downtime for preventive and corrective maintenance.
• Provide a summary of work performed at the frequency and detail required by the facility to document the servicing of the system.
• Preplanned service calls outside of normal business hours may be required to accommodate user schedules, ex: preventative maintenance may be conducted during the evening.

• In order to be successful in this role, you should have at least 5 years' experience in the troubleshooting, maintenance and repair of Electronic / Electrical and computerized electro-mechanical systems such as robotics, conveyors, sensors and PLCs (specifically RS Logic).
• A good mechanical aptitude is desired, as is some level of expertise with computers (software, remote diagnostics, windows-based networking etc).
• And you must be service-minded and customer-focused.

Description

• Perform on-site inspection, validation, testing, and verification of electrical and mechanical equipment (approximately 50%)
• Develop commissioning and testing plans and procedures (approximately 20%)
• Review construction design documents, specifications, and drawings (approximately 15%)
• Produce detailed technical reports, documentation, and commissioning deliverables (approximately 15%)

• Navy Nuclear-trained Technicians (E4–E6) or Officers (O2–O3) with 6–10 years of service from surface ships or submarines
• Skilled conventional Navy Electronics Technicians (ET) or Machinist’s Mates (MM) may also be considered
• Strong technical aptitude and troubleshooting background
• Willingness and ability to travel extensively
• Ability to work in mission-critical, high-reliability environments
• Strong interest in solving complex engineering and systems challenges

• Prior experience in commissioning, testing, or startup of electrical or mechanical systems
• Exposure to data centers, critical infrastructure, or MEP systems
• Experience reviewing technical drawings, specifications, or construction documents

Description

Travel: You can expect 2-3 nights of overnight travel per week. Occasional short-term travel to help other regions, trade shows, and company training events at their headquarters in Marlborough, MA.

Position Description:

As a Field Service Engineer with this company, you will provide field service support to install, conduct preventative maintenance, troubleshoot, repair, and retrofit company products and services. Beyond customer service and support, you will be required to liaison between the company's field support team and the customer to plan installation of equipment at new customer sites and provide follow-on support for the operational aspects of the equipment and software. Expect to work normal daytime hours M-F, accruing 10-15 hours of overtime per week on average.

Essential Duties & Responsibilities:

• Provide optimum customer satisfaction on all company products and services.
• Install, monitor, assess, troubleshoot, and repair equipment within your assigned area of responsibility.
• Install and maintain wired computer networks.
• Provide remote diagnosis/repair support.
• Relay repetitive field service failures/equipment issues to Tier 3 specialists.
• Complete and submit regulatory and company required documentation.
• Represent company at technical shows and exhibitions as required.

Must-Have Skills, Experience, and Education:

• Ideal candidates for this position will have 4+ years of military or industry experience with electronic/electrical process equipment and controls. You will eventually gain proficiency in all the areas below, but be sure to discuss if you have any experience in these areas:
• Previous field service/product installation experience
• Basic wired and wireless network integration experience
• Knowledge of basic anatomy & physiology of the eye
• Skills in operation, test, maintenance, alignment, and repair procedures for electrical equipment & controls.
• Ability to produce high quality work under pressure and within tight timelines with little to no supervision.
• Ability to effectively communicate with customers, co-workers, and supervisors in formal & informal settings.
• Excellent verbal and written communication skills.
• Proficiency with the Microsoft Office Suite.
• Dedication to the team and a sense of flexibility.
• Ability to stand, sit, climb or balance, stoop, kneel, crouch, & crawl, frequently lift more than 25lbs.
• Color vision and the ability to see close objects.
• Safe driving record – Let us know if you have any drug/alcohol driving infractions before your interview.
  

Description

• Focus on customer needs and satisfaction by troubleshooting, installation, validation, maintenance and service repair needs on pharmacy automated equipment.
• Perform 2nd Level hardware preventive and corrective maintenance, as well as some software maintenance.
• Schedule 1st Level (3rd party) resources, including preventative maintenance and service calls.
• Monitor and support 1st Level (3rd party) resources to complete emergency break fix service calls.
• Support the facility group with any enhancements or upgrades that may impact the operation of the company's system by providing information and technical knowledge for a successful implementation.
• Work with the facility (customer) to schedule appropriate downtime for preventive and corrective maintenance.
• Provide a summary of work performed at the frequency and detail required by the facility to document the servicing of the system.
• Preplanned service calls outside of normal business hours may be required to accommodate user schedules, ex: preventative maintenance may be conducted during the evening.

• In order to be successful in this role, you should have at least 5 years' experience in the troubleshooting, maintenance and repair of Electronic / Electrical and computerized electro-mechanical systems such as robotics, conveyors, sensors and PLCs (specifically RS Logic).
• A good mechanical aptitude is desired, as is some level of expertise with computers (software, remote diagnostics, windows-based networking etc).
• And you must be service-minded and customer-focused.

Description

Job Responsibilities:

Description

The Field Service Technician II provides hands-on maintenance and repair services on-site for company's fleet of fuel cell installations. This position will participate in the commissioning of new fuel cells at new sites, as well as support of troubleshooting, testing and repair activities on existing fuel cell installations.

• Under appropriate guidance and direction, performs troubleshooting and repairs on fuel cells installed at customer sites.
• Collaborates with others on commissioning of new fuel cell installations
• Performs service and troubleshooting on ancillary equipment used for overall fuel cell operation.
• Understands principles of large distribution switchgear 480-volt systems.
• Experience with computer systems, preferably remote monitoring, and control systems.
• Understands mechanical and electrical componentry, plumbing, and systems operation.
• Will increasingly utilize the fuel cell remote monitoring system to control fuel cell, as directed
• Utilize electrical schematics to troubleshoot electrical components
• Domestic and overseas travel as needed
• Overtime is as required or needed
• Company vehicle operation and maintenance
• Company expense reporting in a timely manner

Must-Have Skills, Experience, and Education:

• 4-6+ years of hands-on experience servicing/troubleshooting products containing a variety of components electrical and mechanical
• AA/AS with 2-4+ years of experience, as noted above
• Electrical/HVAC trade school certification
• E1/E2 or P1/P2 license preferred
• Valid Driver's License required
• Knowledge of electrical, plumbing and fuel processing systems
• Some training and experience with troubleshooting systems
• Some relevant trades training and experience
• Experience with computer systems
• Analytical thinking
  

Description

Description

As a Service Technician, you will be responsible for performing service, repair, and troubleshooting work in a safe, efficient, and customer-focused manner. This role includes accurately tracking productive labor time versus travel time, performing preventive maintenance in accordance with established service programs, and maintaining detailed service documentation such as work orders and parts usage. You will stay current on equipment updates and ANSI A156.10 standards while ensuring technical manuals, company vehicles, tools, and equipment are properly maintained. Additionally, you will manage service vehicle inventory, provide high-quality customer service, build strong customer relationships, and assist with training and mentoring other technicians on installation and service methods.

Must-Have Skills, Experience, and Education

• High School Diploma or equivalent
• Strong verbal and written communication skills
• Ability to work independently in field-based environments
• Valid driver's license with a clean driving record
• Ability to climb ladders and work at heights
• Ability to stand on concrete for extended periods
• Ability to bend, stoop, kneel, crouch, and twist
• Ability to work overhead and lift 50–75 pounds
• Ability to work in various weather and climate conditions
• Flexibility to work nights, weekends, and participate in on-call rotation as needed

Nice-to-Have Skills

• Prior experience servicing automatic door systems
• Construction experience installing door frames, windows, or glazing systems
• Background in electrical, automotive, or carpentry work
• Experience with databases or system configuration

Description

Shift: B-Shift // 6pm - 6am on a 2-2-3 shift schedule (2 on, 2 off, 3 on, 2 off, 2 on, 3 off) working every other weekend and also includes a 3-day weekend every other week!

Position Description:

Using hand tools and test equipment, the individual will perform maintenance on both electronic and mechanical equipment, such as industrial controls, computers, and servo-mechanisms, following blueprints and manufacturer's specifications. Performs duties within cGMPs for Medical Devices, maintaining change control, notifying QA/RA and engineering where necessary and makes adjustments only within documented and validated limits. Ensures compliance with company's quality systems, policies, procedures and best practices, and all local, state, federal and company's safety regulations, policies and procedures. Specific responsibilities include:

• Perform troubleshooting, diagnose causes and repair equipment.
• Perform preventative maintenance (PMs) on equipment.
• Maintain parts inventory.
• Support engineering projects-ordering and installation of new equipment, new equipment IQs.
• Continuous Improvement projects to reduce expenses, improve reliability, and reduce waste.
• Test electronic circuits to locate defects and understand the use of oscilloscopes, signal generators, amp meters, and voltmeters.
• Install, modify and understand control panel wiring. Work closely with the Controls group to understand and modify PLC programs and maintain PLC ladder logic programs.
• Train operators and assist with machine set-ups/operation as required.
• Work with central crib to maintain an inventory of spare parts, both fabricated and commercial.
• Troubleshoot and repair of pneumatic and mechanical systems.
• Propose design changes and review with engineer to upgrade equipment, eliminate re-occurring problems, improve product quality, reduce costs, etc.
• Duties may require correction of problems during off shifts on a call-up basis. Work closely with tool room to make timely repairs. Work schedules may fluctuate due to product and process start up or machine issues, as well as training of new associates on the off shifts. Must be flexible and willing to work overtime when needed.

Must-Have Skills, Education, and Requirements:

• Thorough understanding of hydraulic, electric, mechanical and pneumatic systems - Proficient
• Ability to read blueprints and schematics - Proficient
• Computer skills (SAP, Excel, Word preferred) - Basic
• Ability to maintain accurate records - Proficient

Description

Description

We are is seeking experienced Diesel Technicians to join our growing team in Sarasota, FL. We have on-site and mobile tech positions available. If you’re skilled in major repairs, engine diagnostics, and electrical systems, we want to hear from you!

Pay Range: $25.00 - $40.00+

• Competitive hourly pay based on experience
• Weekly Pay!!
• Monthly efficiency bonus
• Annual training bonus
• Tool allowance
• Boot allowance
• Comprehensive benefits package, including:
• Medical, Dental & Vision
• Life Insurance
• Short- & Long-Term Disability
• 401(k) retirement plan with employer match

• Class A Technicians preferred (Class B will be considered)
• High School Diploma or equivalent
• 5+ years of diesel mechanic experience
• Ability to perform diagnostics independently or with little to no assistance
• Experience working on all makes,
  including:
• International, Volvo, Mack, Peterbilt, Kenworth, Freightliner, Hino
• Cummins, Paccar, Detroit, Volvo, CAT, International Engines
• Allison and Eaton Transmissions
• Emission and After treatment Systems
• Valid Driver’s License
• Ability to meet physical requirements of the position

• Regularly required to stand, walk, sit, use hands and fingers
• Frequent stooping, crouching, and kneeling
• Must be able to lift and/or move up to 100lbs.
• Manual dexterity sufficient to work with hands and tools
• Work environment includes a well-lighted shop with regular exposure to outdoor weather conditions

Description

Employment Type: Full-Time

• Inspects, diagnoses, repairs, and maintains International Buses
• Performing mechanical and electrical repairs
• Routine maintenance (oil changes, fluid checks, tire rotation)
• Using Diagnostic software
• Ensuring compliance with safety/emissions standards
• Handling paperwork and communicating with customers.
  

• Minimum of 1 year’s medium/heavy duty or bus experience or schooling
• Strong understanding of gas, diesel, propane or EV engines and systems
• Skilled Diesel Technician with own tools
• Valid, clean driver’s license
• Ability to work in a team environment
• Ability to address and resolve issues quickly
• Able to operate in a high paced environment

• CDL a plus
• International/IC dealership experience preferred
• Dealership experience
• Experience using Cummins Insite
• ASE Certifications

• Energetic technician who wants to be a part of a team.
• Technician who wants to keep growing their skills
• Technician who can diagnose complex systems and think outside the box.

• Salary Range: $25.00 – $50.00.

• Medical, Dental, Vision, Life
• Insurance and FSA
  
• 401K with company match
• Continuing Education opportunities
• Tuition Loan Agreement
  
• Catered meals for special occasions
• Snacks and Beverages
• PTO/Sick/Holidays – Start as of Day 1!
  

Description

In this role you will manage end-to-end visa, work permit, and delegation activities for international project resources. The role ensures compliance with immigration and delegation requirements while supporting project schedules, critical site mobilizations, and business continuity. This position serves as the central coordination point between project teams, delegates, HR/global mobility, delegation centers, immigration vendors, consulates and reports to the operations manager. Key responsibilities include:

Description

Manual / CNC Machinist

Location: Lebanon, PA

Employment Type: Full-Time, Hourly (Non-Exempt)

About the Role

PRL Industries is hiring experienced Manual and CNC Machinists to support the expansion of its machining operations in Lebanon, Pennsylvania. This role focuses on production machining and machine setup using manual and CNC mills, lathes, and boring machines to produce precision components used in submarine programs.

Machinists will work from blueprints and technical drawings to machine parts from castings, bar stock, and other materials while maintaining extremely tight tolerances and high quality standards. These roles are production-focused and do not require full programming responsibilities.

What You'll Do

• Set up and operate manual and/or CNC milling machines, boring machines, and lathes
• Machine parts from castings, bar stock, and other materials to customer specifications
• Read and interpret blueprints, drawings, and written machining procedures
• Maintain tight machining tolerances, in some cases as precise as .0002"
• Select appropriate speeds, feeds, cutting tools, and workholding methods
• Use inspection equipment and measuring tools to verify part quality
• Perform minor edits to CNC programs at the machine when needed (G and M code familiarity)
• Assist with fixture and jig setup to support machining operations
• Record production data and maintain documentation related to work performed
• Operate shop equipment such as forklifts or overhead cranes as required Maintain a clean, organized, and safe work area
• Follow safety procedures and participate in required safety training

Must-Have Skills and Experience

(These are required for consideration.)

• Experience operating manual and/or CNC milling, boring, or lathe machines
• Ability to read and interpret blueprints and machining drawings
• Experience using precision measuring tools and inspection equipment
• Knowledge of machining fundamentals including feeds, speeds, tooling, and workholding
• Understanding of shop math, trigonometry, and GD&T principles
• Ability to follow written and verbal instructions
• Ability to work independently with minimal supervision
• High school diploma or equivalent

Nice-to-Have Skills

(These are preferred but not required.)

• Associate's degree or technical training in machining or manufacturing
• Experience editing CNC programs at the machine (G and M codes)
• Experience machining castings and bar stock materials
• Experience assisting with jig and fixture design
• Experience operating forklifts or overhead cranes

Who You Are

• A detail-oriented machinist who takes pride in producing high-quality precision parts
• Comfortable working independently after a training period
• Strong in blueprint interpretation and machining fundamentals
• Focused on safety, quality, and maintaining organized workspaces
• Reliable and able to communicate clearly with supervisors and coworkers

Additional Details

• Schedule:
  • 2nd Shift: 3:30 PM – 1:30AM, Monday-Thursday
  • 3rd Shift: 10:30 PM – 7:00 AM (planned expansion)
• Salary Range:
  • $25-$50 per hour, depending on years of machining experience and demonstrated skill level.
• Travel: Not expected
• Certifications: None Required
• Benefits:
  • Medical, dental, and vision coverage
  • Flexible Spending Accounts (FSA)
  • Short-term and long-term disability coverage
  • Company-paid life insurance
  • 401(k) with company match up to 3%

Description

As a Commissioning/Qualification/Validation Project Engineer, you lead project teams including Project Engineers to deliver systems that are safe, functional, and compliant with design requirements and regulations. You are accountable for overall project execution, client communication, financial management, and team leadership to ensure successful outcomes. This is a full-time, 1st shift exempt position that reports to the President and is in North Carolina.

Primary responsibilities of the position include:

• Lead project scope evaluation and develop commissioning and qualification plans in collaboration with clients, internal teams, and stakeholders.
• Develop project estimates and proposals. Develop change orders as necessary.
• Manage and coordinate project deliverables across commissioning, qualification, and validation disciplines, ensuring deadlines, budgets, and quality standards are met or exceeded.
• Supervise Project Engineers, providing guidance, mentoring, performance management, and conducting regular performance reviews.
• Delegates project tasks to Project Engineers, based on complexity and experience. Reviews and approves documentation prepared by Project Engineers and Technical Writers.
• Monitor project schedules and resource allocation, adjusting plans as necessary to meet company objectives and utilization targets.
• Ensure comprehensive project documentation complies with internal and client standards, regulatory requirements (e.g., ASHRAE, CFR), and Company policies and procedures.
• Oversee project budgets, track performance against financial metrics, communicate billing needs, and develop and submit change orders as required.
• Serve as the primary point of contact for clients, attending meetings, managing expectations, building relationships, and pursuing new work opportunities.
• Promote a culture of safety by ensuring OSHA and other relevant regulations are followed on all projects.
• Regular and reliable attendance at work.

Additional responsibilities of the position include:

• Other duties as assigned by Company Management.
• Complete required company training each month.

Must-Have Skills, Experience, and Education:

• Bachelor's Degree or Associate Degree in Engineering or related field.
• Extensive experience in capital project delivery, construction, commissioning, and document management.
• Strong leadership and team management skills, with ability to mentor and develop staff.
• Exceptional project management, organizational, and multitasking capabilities.
• Excellent interpersonal and communication skills, capable of managing client relationships at all levels.
• Demonstrated financial acumen to manage project budgets and billing processes effectively.
• High degree of technical knowledge in commissioning, qualification, validation, and related construction processes.
• Proficient in Microsoft Office Suite and project management software.
• Valid driver's license and clean motor vehicle record.
• Willingness to travel as needed.

Working Conditions:

• On site.
• Perform work at desk in office.
• Travel to local customer sites when needed.

This is a full-time, salaried, exempt position. The typical schedule is based on an eight-hour workday and a forty-hour workweek, excluding meal breaks. Employees typically take a 30-60-minute unpaid lunch break during the day. Because our work supports construction and commissioning activities, work hours may vary based on project requirements, client needs, or site conditions.

Disclaimer:

• Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship.
• The Employer retains the right to change or assign other duties to this position.

The successful candidate will enjoy:

• Competitive compensation package.
• Paid Time Off and paid holidays.
• Medical, Dental, Vision insurance.
• Short-Term and Long-Term Disability.
• 401(k) match, Life Insurance, HSA and FSA accounts.

Description

Description

Facilities Manager

About the Role

• Hire, supervise, and discipline hourly maintenance personnel across 3 shifts
• Plan, schedule, and direct daily work assignments to keep equipment and facilities operating efficiently
• Obtain cost estimates and develop budgets for maintenance and facilities projects
• Schedule and coordinate corrective and preventive maintenance
• Recommend materials and parts to be inventoried
• Maintain all facility and maintenance records
• Coordinate and manage elements of facilities projects (construction, renovations, repairs, new equipment installation)
• Initiate and execute projects that improve safety, efficiency, and cost-effectiveness while maximizing space utilization
• Provide input on and execute elements of the annual Capital Expenditure (CapEx) budget
• Coordinate emergency repairs and respond to facility issues promptly
• Interface with OSHA, EPA, and state/local regulatory agencies to ensure compliance
• Coordinate employee safety training and promote a safety culture
• Coordinate and oversee contractors performing work on facilities
• Generate purchase requisitions for contractor work and new equipment
• Review contractor proposals, drawings, and specifications prior to awarding work
• Develop project schedules, monitor schedule performance, and track costs
• Negotiate contracts with contractors and service providers
• Coordinate with Facility Security Officer regarding security and surveillance matters
• Perform additional duties as assigned

• High school or trade school diploma, or equivalent experience
• Minimum 5 years of experience in heavy industrial manufacturing or facilities management
• Knowledge of mechanical, electrical, HVAC systems, plumbing, and construction practices
• Understanding of environmental regulations, industrial safety, and OSHA requirements
• Strong organizational and project management skills
• Strong written and verbal communication skills
• Proficiency with ERP systems and Microsoft Office applications (Word, Excel, Outlook, PowerPoint)
• U.S. Citizenship required at time of hire

• Experience managing union personnel
• Experience with safety audits and training programs
• Knowledge of capital project planning and budgeting
• Familiarity with industrial equipment maintenance and facilities upgrades

• Collaborative leader with the ability to work across departments
• Detail-oriented and highly organized
• Safety-focused with a proactive approach to compliance and risk management
• Comfortable managing contractors, regulatory interactions, and multiple concurrent projects
• Able to balance strategic planning with hands-on problem solving

• Salary: $85,000 – $100,000 per year

• 401(k) with matching
• Health, dental, and vision insurance
• Life insurance
• Paid time off
• Parental leave
• Tuition reimbursement
• Flexible spending account
• Employee assistance program

Description

General Dynamics Electric Boat (Quonset Point)

X-Ray Welder

Description

Description

Description

We are currently seeking a Parts Account Manager/Sales Professional who will be responsible for the management of our current accounts and the acquisition of new customers with an emphasis on excellent customer service, negotiation skills and efficient closure rates.

• Identify and establish relationships with existing and potential customers.
• Selling all products including but not limited to parts, service, and technology products.
• Prospect for new accounts/referrals, which includes compiling and updating a list of prospective clients to provide leads for additional business.
• Develop, implement, and maintain comprehensive account-specific growth strategies.
• Service current accounts and communicate with clients on a regular basis. Discuss use and features of various parts, services and vehicles.
• Account Management.
• Update account profiles for monthly meetings for information regarding sales potential.
• Follow up on orders to ensure that customers are served promptly.
• Coordinate parts and service sales with the appropriate personnel. Advise counterperson on delivery instructions.
• Inform management by completing reports, forwarding information on competitors.
• Accomplishes sales and organization mission by completing related results as needed.
• Updates job knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.

• No sales experience required will train!
• Mechanical aptitude is beneficial.
• High school diploma required; College education preferred.
• Strong written/ verbal communication skills required.
• Ability to work independently.
• Highly self-motivated and goal oriented professional a must.
• Enthusiastic outgoing go getter mentality, self-starter and a “can do” attitude.
• Valid Driver’s license is required.
  

• Good social skills & strong attention to detail.
• Self-driven.
• Demonstrated sales ability with a successful track record.
• Knowledge of dealer and fleet maintenance procedures and systems.
• Working knowledge of International and supplier/vendor warranty policies.
• Strive for respect and teamwork in the department and throughout the dealership.
  

• 401(k) & 401(k) matching
• Dental insurance
• Health insurance
• Vision
• Paid time off - starts as of Day 1!
  

Description

Description

CNC MACHINIST III

JOB SUMMARY

CNC Machinist III operates and programs a CNC machine tool. This includes setting up and verifying tooling, setting part offsets, and programming computer-aided manufacturing (CAM) software. With little guidance, this person can complete a complex part from start to finish.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Performs safe operations by adhering to safety procedures and regulations.
• Observes machine operation to detect malfunctions or out-of-tolerance machining conditions.
• Operates and maintains machine according to work instructions.
• Takes precise measurements to verify program accuracy.
• Monitors and develops speed, feed, depth, and/or angle of cut during machining operations.
• Maintains clean work area and machine daily.
• Maintains workflow between shifts by documenting and communicating actions.
• Programs toolpaths with CAM software.

The above list reflects the general details describing the position's principles and essential functions. It shall not be construed as the only duties that may be assigned for the position.

An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• 5+ years of experience as a CNC Machinist.
• Ability to operate and program CNC machine tools.
• Previous experience machining various exotic materials and specialty tooling.
• CAM software experience.
• GD&T experience.
• Working knowledge of safety protocols.
• Has strong attention to detail and is self-motivated.
• Strong understanding of mathematics.
• Possesses leadership skills.

PREFERRED QUALIFICATIONS

• High school degree or equivalent.
• Apprenticeship or vocational training.
• Powermill experience.

PHYSICAL AND MENTAL DEMANDS

To perform the essential functions of this job successfully, an employee must meet the physical and mental demands described here. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

Description

QUALITY ASSURANCE TECHNICIAN III

JOB SUMMARY

The Quality Assurance Technician III is a senior-level role responsible for ensuring that machined parts and assemblies meet internal standards, customer specifications, and applicable industry/ISO requirements. This position serves as a subject matter expert on quality inspection processes, advanced measurement tools, and root cause analysis. The QA Tech III mentors junior inspectors, supports continuous improvement initiatives, and partners with engineering and production teams to maintain the highest standards of product quality and compliance.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Performs advanced dimensional inspections of machined components using precision measuring equipment (CMM, optical comparators, height gauges, micrometers, calipers, etc.).
• Interprets complex engineering drawings, GD&T, specifications, and customer requirements.
• Conducts First Article Inspections (FAI) in accordance with AS9102 or customer-specific requirements.
• Develops, reviews, and maintains inspection plans, control plans, and quality documentation.
• Supports PPAP submissions and customer qualification processes.
• Leads root cause analysis and corrective action efforts for nonconforming product.
• Assists in the calibration and maintenance of inspection equipment.
• Mentors and trains junior QA technicians and production personnel on quality processes and standards.
• Participates in internal and external audits (ISO 9001, AS9100, customer audits).
• Collaborates with engineering and production teams to drive process improvements and prevent recurrence of quality issues.
• Ensures compliance with company, customer, and regulatory requirements.

The above list outlines the general details that describe the position's principles and essential functions. It shall not be construed as the only duties assigned for the job. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• High school diploma or equivalent required;
• Minimum 5-7 years of quality assurance experience in a precision machining/manufacturing environment.
• Strong knowledge of GD&T, blueprint reading, and metrology.
• Proficient in the use of CMMs.
• Experience with ISO 9001 and/or AS9100 quality systems.
• Solid understanding of statistical process control (SPC), PPAP, and root cause/corrective action methods.
• Excellent problem-solving, documentation, and communication skills.
• Ability to work independently with minimal supervision while also collaborating in a team environment.
• Strong computer skills, including Microsoft Office, ERP/MRP systems, and quality software tools.

PREFERRED QUALIFICATIONS

• Associate degree or technical certification in Quality, Manufacturing, or related field.
• 7+ years of quality assurance experience in a precision machining/manufacturing environment.
• Proficient in the use of PC-DMIS, Zeiss Calypso, or similar software.

PHYSICAL AND MENTAL DEMANDS

The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Frequently required to talk or hear.
• Frequently required to sit, stand, walk, use hands to finger, handle, or feel, and reach with hands and arms.
• Occasionally required to climb or balance; stoop, kneel, crouch, or crawl.
• Frequently required to lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Read English.
• Communicate effectively with employees.
• Stand, walk, push, pull, reach overhead, and bend to the floor.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Primarily shop-based position.
• Moderate noise levels from operating machines in the shop.
• Physical hazards from moving equipment and machine parts in the shop.
• Breaking fumes, dust, and mist in the shop.
• Skin exposed to oils and cutting fluids in the shop.
  

Description