Orion Talent Job Search & Career Recruiting

Description

Physical Demands 

The following physical demands must be met by the employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

Travel Requirements

Description

Description

Description

• Test, inspect, adjust, and repair mechanical building systems
• Align, service, and replace hot water heating, chilled water, and condenser water pumps
• Inspect, service, and operate water heating and low-pressure steam systems
• Repair and replace steam, hot water, and chiller system components
• Perform daily operation and maintenance of chilled water generating equipment (non-refrigerant side)
• Inspect, clean, maintain, and operate cooling towers
• Repair and replace air handler components, dampers, coils, fans, and generator engines
• Inspect, test, clean, lubricate, and monitor fire pumps and related equipment
• Shut down, start up, repair, and install irrigation systems
• Reset and program building master clocks and lighting panels
• Flush and winterize heating and cooling coils
• Notify supervision of equipment, supply, and facility repair needs
• Maintain safe, clean work areas and follow established operating procedures

• Technical training in mechanical maintenance
• Minimum 3 years of applicable mechanical experience
• Ability to follow written and verbal instructions
• Ability to meet physical demands of the role
• Strong safety mindset and adherence to procedures
• Professional, cooperative communication skills when interacting with coworkers and the public

Nice-to-Have Skills, Experience, and Education

• HVAC system experience
• Experience with steam, chilled water, or institutional facility systems
• Military mechanical background (highly valued)

Description

• Properly operate both common and specialized test equipment in the performance of assigned tasks.
• Properly operate ¼ of a million-dollar test equipment for QA approved Calibration certificates which are NIST traceable
• These certificates are then maintained by Corporate Document Control for reference by customers, EPA and other government agencies
• Maintains Repair Center facilities, documentation and equipment.
• Performs component level repairs and calibration on field instruments, analytical instruments, Digital Acquisition Systems, TMI and Meter products per Company standards.
• Accurate and timely completion of all documentation associated with assigned tasks. Including entry of quality data on work completed for certifying equality to factory specifications
• Receives training and works toward mastering repair of multiple product families and specialize in industrial instrumentation and process control devices, test equipment or Test measurement equipment.
• Always prepared to train other Technicians on their specialty product families Operates, diagnoses, troubleshoots, repairs, adjusts, and calibrates products in assigned product group. Has sufficient knowledge of assigned products to provide technical assistance in the operation and diagnostics of problems encountered by Sales, Marketing, Sales Reps and Customers. Must be self-motivated and thorough. Strong communications skills are required. Log all incoming units into calibration log and forward paperwork for processing.
• Properly operates common and specialized test equipment in the performance of assigned tasks.
• Supports the objective of "Total Customer Satisfaction” and functions as a team member in support/assistance of meeting goals of the T&M and Service Division.
• Responsible for providing uncompromising quality to all work processes in designated area of responsibility. Having the authority to stop those processes at any time it is believed quality is being compromised.
• Must be able to work with minimum supervision and manage their time for the best productivity.
• Performs other duties as assigned

• Two-year degree in appropriate discipline or equivalent, including military training.
• Five years' experience in metrology, electronic/electrical systems service and /or repair environment.
• Provide technical training to other service technicians through hands-on training. Participate in individual and team problem solving missions and provide management with solutions. Good work ethic skills like tidiness. Experience with Microsoft products, adaptability. Beneficial additional skills, SAP, CRM, and Industrial communication protocols. An understanding of ISO 9000 and ISO 17025 procedures.

Description

• Perform preventive and corrective maintenance on building automation systems
• Troubleshoot and repair DDC (Direct Digital Control) systems
• Analyze HVAC and building control system performance
• Optimize building automation systems to improve efficiency and comfort
• Perform software and hardware upgrades on control systems
• Troubleshoot electrical and electronic control circuits
• Review project plans, engineering drawings, specifications, and sequences of operation
• Maintain accurate service documentation and reports
• Support customers by identifying and resolving building control issues
• Ensure work complies with project requirements and existing site conditions

• HVAC and/or mechanical systems knowledge
• Experience troubleshooting electrical and electronic systems
• Knowledge of basic electrical circuits
• Strong mechanical and electrical troubleshooting ability
• Computer skills and interest in technology-based systems
• Valid California Driver's License with clean driving record
• Ability to work independently in customer-facing environments
• Strong communication and customer service skills

• Building Automation Systems (BAS) experience
• Direct Digital Controls (DDC) experience
• HVAC controls experience
• PLC or controls programming experience
• Energy management systems experience
• Computer programming experience
• Military experience in:
  • HVAC
  • Electronics
  • Electrical systems
  • Power generation
  • Nuclear operations
  • Building systems
  • Instrumentation & Controls

• Moderate to heavy physical activity
• Standing, walking, bending, and climbing
• Lifting and carrying up to 50 pounds
• Driving throughout assigned territory
• Working at customer facilities and mechanical rooms

Description

Description

• Commissioning new equipment and performing preventive maintenance, troubleshooting, and repair of existing equipment
• Providing telephone and on-site customer support
• Preparing detailed Field Service Reports (FSRs) documenting work performed and equipment performance
• Training at the Tulsa, OK home office, followed by on-the-job training (OJT) with experienced FSTs before autonomous work

• Provide technical service support on existing installations to ensure systems meet building codes and operate efficiently
• Program and commission control systems and integrate them with building automation systems
• Work with multiple control systems across different sites
• Communicate directly with customers to resolve site-specific issues
• Document service calls, including follow-up requirements
• Replace failed parts, controllers, wiring, relays, and devices as needed
• Maintain courteous and professional interactions with customers
• Verify devices, panels, and annunciators of control projects
• Ensure timely software backups for projects and software development
• Complete timesheets, service work orders, and other required paperwork accurately and on time

• Strong electrical, electronic, and/or mechanical aptitude, including troubleshooting, maintenance, and repair of equipment and systems such as AC/DC motors, industrial controls, compressors, backup generators, etc.
• Ability to use volt meters, amp meters, oscilloscopes, and troubleshoot basic electric/electronic circuitry
• Ability to read and interpret electrical and electronic diagrams
• Working understanding of AC power circuitry (including breakers, multi-phase power, 120VAC)
• Comfortable working at heights or in confined spaces
• Service-minded and customer-focused
  

Description

The MMOM (Major Market Operating Model) Zone Logistics Manager is responsible for leading all warehouse and logistics operations across multiple locations. This role provides zone-level leadership to local site warehouse managers andaccountable for driving standardized, safe, and efficient execution of all inbound and outbound logistics processes across multiple branch locations. The Zone Logistics Manager ensures alignment with company standards in warehouse operations, safety compliance, receiving, put-away, inventory handling, picking, packing, shipping, and delivery readiness. This position partners closely with commercial and branch leadership to ensure logistics execution supports customer commitments, ISOTIF performance, and profitable growth. A Major Market is defined as major metropolitan area consisting of 3+ branches, $200M+ in revenue, and in one of the top 10 largest cities in the U.S.

What You'll Do:

• Lead warehouse and logistics operations across all zone locations
• Provide leadership, coaching, and direction to local site warehouse managers
• Establish consistent expectations, daily operating disciplines, and performance standards across the zone
• Ensure all locations operate under a unified logistics model aligned with company standards
• Serve as the zone subject matter leader for warehouse execution, logistics workflow, and safety compliance
• Design, implement, and enforce standardized processes for inbound and outbound logistics across all branches
• Standardize receiving, inspection, put-away, labeling, staging, picking, packing, shipping, and transfer processes
• Drive consistency in system transactions, work methods, visual controls, and warehouse organization
• Audit location-level execution to ensure compliance with zone and company standards
• Identify process gaps and lead corrective action and continuous improvement efforts
• Oversee inbound freight flow, receiving quality, unloading practices, material verification, and system receipt accuracy
• Ensure material is received, labeled, and put away accurately and efficiently
• Partner with vendors, branch teams, and internal stakeholders to improve inbound visibility and readiness
• Reduce receiving errors, put-away delays, and material handling inefficiencies
• Oversee all outbound warehouse activity including picking, packing, staging, loading, and shipping
• Ensure orders are fulfilled accurately, safely, and on time to support customer  requirements and ISOTIF goals
• Improve outbound process flow, reduce shipping errors, and increase labor efficiency
• Coordinate with inside sales, branch leadership, and expediting teams to prioritize urgent and customer-critical orders
• Lead zone-wide warehouse safety and compliance programs, adhere to company safety standards, audits/inspections, corrective actions and regulatory adherence to ensure safe operations across multiple sites
• Train and coach warehouse teams on equipment use, material handling,housekeeping and hazard prevention while building a strong safety culture through meetings, incident reviews and accountability
• Establish and monitor key logistics KPIs including on-time shipment performance, inventory accuracy, receiving accuracy, productivity, freight cost, and safety incident rate
• Use metrics, audits, and observation to identify root causes and improvement opportunities
• Lead continuous improvement initiatives that improve service, reduce cost, and increase standardization
• Partner with the Commercial Zone Manager on staffing, capital needs, layout improvements, and operational planning
• Provide direct or indirect leadership to site warehouse managers, warehouse supervisors, logistics coordinators, and warehouse personnel across the zone
• Coach local leaders on performance management, labor planning, process control, and employee development
• Other duties as assigned

Must-Have Skills, Experience, and Education:

What You'll Need

• 10+ years experience managing large supply chain networks in a leadership role
• Experience in logistics and supply chain optimization
• Logistics, lean six sigma, project management, or other continuous improvement methodology certification
• APICS: CLTD (certified logistics transportation and distribution
• Project Mgmt Institute: CAPM or PMP
• Lean Six Sigma: Green belt or higher
• Bachelor's Degree or Equivalent - Required

Knowledge, Skills & Abilities

• Ability to work with, learn from, and influence people
• Ability to work with, learn from, and use quantitative methods
• Strong warehouse and logistics leadership
• High expectations for safety and execution
• Ability to coach and influence site leaders
• Process-minded thinking
• Strong communication and organizational skills
• Urgency, discipline, and follow-through

Description

Description

Description

Seeking a skilled and adaptable professional with a high level of dedication. This role is responsible for installing, troubleshooting, and servicing commercial and industrial electrical systems while following engineering plans to drive success as an integral part of the electrical team.

• Assist with installation of Commercial and Industrial Electrical equipment.
• Install associated wiring, conduit, and terminate as required
• Follow engineering plans and wiring diagrams
• Create as builds based on actual installation

Must-Have Skills, Experience, and Education:

• Minimum 3 years of Commercial Electrical experience.
• Manage multiple priorities.
• Ability to think independently and solve problems.
• Possess good customer service and communications skills.
• Build rapport with customers.
• Strong analytical and problem solving skills.

Description

Key Responsibilities

• Install, maintain, troubleshoot, and repair production and facility equipment; verify and test all repairs for quality and accuracy
• Perform mechanical, electrical, pneumatic, and hydraulic maintenance throughout the facility
• Utilize CMMS to document work orders, preventive maintenance, call logs, shift reports, parts usage, labor, and status updates
• Proactively identify equipment issues and improvement opportunities
• Maintain clean, organized, and safe work areas
• Accurately maintain maintenance records and documentation in a timely manner
• Use electronic tools and systems including PC, email, phone, and CMMS software
• Work independently or collaboratively while remaining productive throughout the shift
• Maintain strong communication and working relationships across departments
• Follow all safety, environmental, GMP, and PPE requirements
• Support facility improvement projects as assigned

Must-Have Skills, Experience, and Education

• High School Diploma or GED required (or equivalent combination of education and experience)
• Minimum of 3 years' experience in a manufacturing environment (food manufacturing experience preferred)
• Strong mechanical, electrical, pneumatic, and hydraulic skills
• Experience with PLCs and VFDs
• Ability to troubleshoot using logic, reasoning, and analytical thinking
• Strong work ethic, integrity, and commitment to attendance
• Ability to work with minimal supervision in a fast-paced environment
• Valid driver's license

Physical Requirements

• Ability to work in a manufacturing environment with temperatures ranging from -10°F to above-normal heat
• Ability to lift up to 50 lbs. occasionally above shoulder height
• Prolonged standing, walking, and occasional sitting
• Ability to climb ladders, bend, kneel, and work in confined or awkward spaces
• Strong hand-eye coordination and visual acuity to inspect machinery
• Ability to work safely around powered equipment, flashing lights, and industrial noise
• Welding experience preferred (MIG – Steel, TIG – Steel/Aluminum)
• Ability to safely maintain x-ray and metal detection equipment
• Comfortable working in high-voltage areas while following all safety protocols
• Flexibility to work weekends or off-hours as needed

What We Offer

• Medical, Dental, and Vision Insurance
• Employer-paid $25,000 Life Insurance Policy
• Flexible Spending Account (FSA) and Health Savings Account (HSA)
• Optional Voluntary Life, AD&D, Critical Illness, and Short-Term Disability
• 401(k) Retirement Plan with Company Match
• Paid Time Off (PTO) and Paid Holidays
• Ongoing technical training and development opportunities

Description

Key Responsibilities:

• Coordinate engineering, purchasing, fabrication, construction, and subcontractor activities.
• Track project schedules, budgets, labor, materials, and procurement.
• Manage RFIs, submittals, purchase orders, and project documentation.
• Participate in jobsite meetings and support field coordination.
• Help resolve installation and operational challenges.
• Build relationships with customers, vendors, and project partners.

Must-Have Skills, Experience, and Education:

• B.S. in Engineering, Construction Management, or related field, or equivalent experience.
• Strong organization, communication, and problem-solving skills.
• Customer-focused with a desire to learn and grow.

Location:

• Central Valley (Bakersfield to Fresno)
  

Compensation:

• $100 - $120k salary
• Monday-Friday schedule
• Regional travel to project sites as needed

Description

• Days: 7:00am-7:00pm
• Nights: 7:00pm-7:00am (+ shift differential)

• Applies learning, knowledge, skills, and company policies to a wide range of tasks pertaining to IT, electrical and mechanical equipment, controls, and operating systems
• Leads, maintains, monitors, and performs preventive maintenance on mechanical and electrical equipment; records readings and adjusts where necessary to ensure proper operation of equipment.
• Provide remote hands and eyes services for customers.
• Provide high level computer hardware and software configuration support. Install suite wall, cage material, ladder rack, fiber tray, cabinets, cabling and customer equipment based on documentation provided by provisioning documentation and established Data Center Operation procedures.
• Installs and repairs IT, mechanical, and electrical equipment as required; assists other team members with major repairs and maintenance of building and equipment.
• Process work orders for preventative and corrective maintenance on critical, building, and site infrastructure.
• Consults with supervisor or team lead to order necessary tools and equipment as required to complete all maintenance and perform necessary work.
• Create and/or update tickets within the established ticketing system to address customer calls, data center facility, network and/or system related alerts.
• Operates and monitors critical and non-critical system equipment and components to ensure safe and compliant operation.
• Responds as required to building emergencies and customer requests.
• Complies with departmental policy for the safe storage, usage, and disposal of hazardous materials.
• Uses the Change Management Process to get approval for preventative and corrective maintenance. Commences & completes the maintenance along with the necessary documentation using the company's process and software.

Must-Have Skills, Experience, and Education:

• Five or more of technical training, military training, or workplace equivalency
• Background in areas of IT, electrical, and/or mechanical
• Proficiency with MS Office Suite

Description

As an Electrical Technician, you will play a critical role in maintaining the safe and reliable operation of terminal, pipeline, and station electrical systems. This position is responsible for troubleshooting, maintaining, repairing, installing, and commissioning electrical, instrumentation, and control systems that support pipeline and terminal operations.

The successful candidate will support maintenance and operational objectives through preventative and corrective maintenance activities while ensuring compliance with company procedures, safety standards, and regulatory requirements. This role is ideal for candidates with industrial electrical, instrumentation, controls, power generation, oil & gas, pipeline, military electrical, or automation backgrounds who enjoy troubleshooting complex systems and working in field environments.

Description

• Prepare medical equipment and documentation for delivery
• Load and unload medical equipment
• Drive 26 foot box truck to make deliveries and pick-ups
• Process delivery and pick-up documentation as required
• Maintain vehicle appearance by ensuring all routine vehicle maintenance is completed and records maintained
• Clean and disinfect medical equipment to Company quality standards
• Present highest level of customer etiquette in all patient/customer interactions

• High school diploma or equivalent
• MUST HAVE clean driving record
• Two(2) years’ experience within service or operations field
• Two(2) years’ experience in front-line customer-service
• Experience with Microsoft Office applications, including Word, Excel, & Outlook
• Ability to lift up to 75lbs and push/pulling up to 135 pounds
• Ability to drive work truck
• Ability to work with solvents and cleaners to disinfect products in a non-climate controlled warehouse environment

• Total Cash – Base pay ($25-27/hr + OT and performance bonus) + 8% Differential for 2nd shift.
• Benefits – Competitive medical, vision, dental, etc. insurance and award-winning 401k plan.
• Paid time-off – 15 PTO days, 12 holidays (8 standard/4 floating), birthday and voluntary days off.
• Paid Training and Development - We support the development and growth of our employees through constant growth opportunities.

Description